• info@fortuneaquaproof.com
  • Asangaon West, Thane, Maharashtra - 421601

FORTISEAL® S

Sanded HDPE Waterproofing Membrane

PRODUCT DESCRIPTION

FORTISEAL® S is a factory-manufactured, flexible high-density polyethylene (HDPE) sheet membrane designed to provide a continuous barrier against water and moisture. The Sanded Grade grade is engineered for the intended waterproofing application and is supplied in controlled thicknesses for consistent site performance.

KEY FEATURES
• High resistance to water penetration and moisture transmission.
• Sand-textured protective surface designed for the intended system configuration.
• Good dimensional stability and mechanical durability.
• Suitable for below-ground waterproofing applications.
• Can be detailed at laps, corners, penetrations and terminations using approved system accessories.
• Factory-controlled thickness and sheet quality.

TYPICAL APPLICATIONS
Basement walls and foundations; retaining walls; podiums and substructures; tunnels and underground structures; water-retaining/protection zones where compatible with the project design; and other concrete structures requiring sheet-applied HDPE waterproofing.

Property 1.2 mm 1.5 mm 1.8 mm Test method / reference
Colour
White / Off White
White / Off White
White / Off White
Visual observation
Thickness of composite membrane
1.2 mm
1.5 mm
1.8 mm
ASTM D 3767
Thickness of bare HDPE film
To be validated
0.9 mm
1.2 mm
ASTM D 3767
Tensile strength (bare HDPE film)
To be validated
25 MPa
28 MPa
ASTM D 412
Elongation (bare HDPE film)
To be validate
500 %
500 %
ASTM D 412
Puncture resistance
To be validated
1000 N
1500 N
ASTM E 154
Low-temperature flexibility
To be validated
(-25°C) Pass
(-25°C) Pass
ASTM D 1970
Resistance to hydrostatic head
To be validated
70 m
70 m
ASTM D 5385
Peel adhesion to concrete
To be validated
1500 N/m
1500 N/m
ASTM D 903
Crack cycling
To be validated
Pass
Pass
ASTM C 1305
Water vapour transmission rate
To be validated
0.1 g/m²/h
0.1 g/m²/hr
ASTM E 96
Dimension stability
To be validated
0.5%
0.5%
ASTM D 1204
Lap peel adhesion
To be validated
1.5 N/mm
1.5 N/mm
ASTM D 1876
Water absorption
To be validated
0.5%
0.5%
ASTM D 570
UV exposure
To be validated
45 days Pass
45 days Pass
Internal test method